Fast and Simple
The dry cut blocker acts instantly in response to a signal sent by a second control hardware. Upon receiving the command, the device changes its state and can be used as a blocker, or to activate devices.
The dry cut blocker is intended for the control of loads and remote blocking of light and heavy vehicles, when in conjunction with a crawler. When powered, it anchors the relay in the NA position and remains attached as long as the power remains active.
Operation
When the blocker is switched on, the relay is moored in the NA position and remains that way as long as the power remains active.
Applications
- Locking / unlocking light / heavy vehicles;
- On / off switch for equipment and devices in general;
- Industrial / residential automation.
General
- Module dimensions (L x W x H): 52 x 43 x 28 mm
- Double-sided fixing tape (L x W x H): 45 x 35 x 3 mm
- Dimension of power cables: 260mm
- Relay contact cable dimension: 800mm
- Power cable gauge: φ = 0.50mm2
- Gauge of the relay contact cables: φ = 2, 50mm2
Environment
- Degree of protection of the electronic module:
- With resin (optional): IP67;
- Without resin: IP40.
- Operating temperature: -20 to + 85oC.
Charging
- Operating voltage: 10V to 37V;
- Load Dump protection, complying with ISO 7637-2: 2004
- Pulse 5;
- Consumption:
- Untied: 0mA;
- Moored: 100mA max.
- Maximum current between NC and Common: 30A;
- Maximum current between NA and Common: 40A;
Note: There is no internal fuse protection.
Por que usar o Fast Block
-
Velocity
Rapid action in response to a command sent.
-
Protection
All Effortech blockers have a protection circuit against the Load Dump effect, which protects both the blocker circuit and the tracker.
-
Safety
The relays have a standard format that is already known and easy to violate. The Fast Block consists of a sealed "black box", making it difficult to identify the circuits in case of attempted violation.
